Figure 10-7 Menu 24.3.2 - System Maintenance - Syslog And Accounting; Table 10-3 System Maintenance Menu - Syslog Parameters - ZyXEL Communications PRESTIGE 650H-13 User Manual

Prestige 650H ADSL Router
Press Space Bar to Toggle.
Figure 10-7 Menu 24.3.2 — System Maintenance — Syslog and Accounting
You need to configure the UNIX syslog parameters described in the following table to activate syslog then
choose what you want to log.
Table 10-3 System Maintenance Menu — Syslog Parameters
PARAMETER
UNIX Syslog:
Active
Syslog IP Address
Log Facility
Types:
CDR
Packet Triggered
Filter Log
PPP Log
The following are examples of the four types of syslog messages sent by the Prestige:
SdcmdSyslogSend ( SYSLOG_CDR, SYSLOG_INFO, String);
String = board xx line xx channel xx, call xx, str
board = the hardware board ID
line = the WAN ID in a board
10-6
Menu 24.3.2 - System Maintenance - UNIX Syslog
UNIX Syslog:
Active= No
Syslog IP Address= ?
Log Facility= Local 1
Types:
CDR= No
Packet triggered= No
Filter Log= No
PPP Log= No
Press ENTER to Confirm or ESC to Cancel:
Use [SPACE BAR] and then [ENTER] to turn syslog on or off.
Type the IP address of your syslog server.
Use [SPACE BAR] and then [ENTER] to select one of seven different local options.
The log facility lets you log the message in different server files. Refer to your UNIX
manual.
Call Detail Record (CDR) logs all data phone line activity if set to Yes.
The first 48 bytes or octets and protocol type of the triggering packet is sent to the
UNIX syslog server when this field is set to Yes.
No filters are logged when this field is set to No. Filters with the individual filter Log
Filter field set to Yes are logged when this field is set to Yes.
PPP events are logged when this field is set to Yes.
DESCRIPTION
1 - CDR
System Information and Diagnosis