Procedure To Configure Dynamic Dns; Table 2-4 General Setup Menu Fields - ZyXEL Communications PRESTIGE 650H-13 User Manual

Prestige 650H ADSL Router
FIELD
System Name
Location (optional)
Contact Person's
Name (optional)
Domain Name
Edit Dynamic DNS
Route IP
Bridge

2.11.3 Procedure to Configure Dynamic DNS

Step 1. To configure Dynamic DNS, go to Menu 1 — General Setup and select Yes in the Edit
Dynamic DNS field. Press [ENTER] to display Menu 1.1— Configure Dynamic DNS as
shown next.
2-14

Table 2-4 General Setup Menu Fields

Choose a descriptive name for identification purposes. This name can
be up to 30 alphanumeric characters long. Spaces are not allowed, but
dashes "-" and underscores "_" are accepted.
Enter the geographic location (up to 31 characters) of your Prestige.
Enter the name (up to 30 characters) of the person in charge of this
Prestige.
Enter the domain name (if you know it) here. If you leave this field blank,
the ISP may assign a domain name via DHCP. You can go to menu 24.8
and type "sys domainname" to see the current domain name used by
your gateway.
If you want to clear this field just press the [SPACE BAR]. The domain
name entered by you is given priority over the ISP assigned domain
name.
Press the [SPACE BAR] to select Yes or No (default). Select Yes to
configure Menu 1.1 — Configure Dynamic DNS (discussed next).
Set this field to Yes to enable or No to disable IP routing. You must
enable IP routing for Internet access.
Turn on/off bridging for protocols not supported (for example, SNA) or
not turned on in the previous Route IP field. Select Yes to turn bridging
on; select No to turn bridging off.
DESCRIPTION
Hardware Installation and Initial Setup
EXAMPLE
PP650H
MyHouse
JohnDoe
zyxel.com.t
w
No
Yes
No