Internet Access Configuration; Table 3-4 Internet Account Information - ZyXEL Communications PRESTIGE 650H-13 User Manual

DHCP client on the WAN port and so the IP Address and ENET ENCAP Gateway fields are not applicable
(N/A) as they are assigned to the Prestige by the DHCP server.

3.13 Internet Access Configuration

Menu 4 allows you to enter the Internet Access information in one screen. Menu 4 is actually a simplified
setup for one of the remote nodes that you can access in menu 11. Before you configure your Prestige for
Internet access, you need to collect your Internet account information from your ISP and telephone
company.
Use the following table to record your Internet Account Information. Note that if you are using PPP or
PPPoE encapsulation, then the only ISP information you need is a login name and password. You only need
to know the Ethernet Encapsulation Gateway IP address if you are using ENET ENCAP encapsulation.
FIELD
System Name
Service Name
(PPPoE
Encapsulation)
Encapsulation
Multiplexing
VPI
VCI
My Login
My Password
Idle Timeout
(PPPoE or PPP)
IP Address
Network Address
Translation
Internet Access

Table 3-4 Internet Account Information

DESCRIPTION
Name of the Prestige (optional).
Enter the PPPoE service name if the ISP supplies one.
Enter "any" if the ISP does not assign you one.
PPPoE, RFC1483, PPP or ENET ENCAP.
LLC-based or VC-based. If this information is not
given, use the default.
Enter your Virtual Path Identifier here.
Enter your Virtual Channel Identifier here.
Enter the login name assigned by your ISP (for
PPP/PPPoE only).
Enter the password associated with your ISP assigned
My Login (for PPP/PPPoE only).
Enter the time lapse, in seconds, before you
automatically disconnect from the PPPoE or PPP
server.
Enter if your IP address is not dynamically assigned.
Full Feature, SUA Only or None.
Prestige 650H ADSL Router
YOUR INFO
3-13