Table 10-4 System Maintenance Menu Diagnostic - ZyXEL Communications PRESTIGE 100 - VERSION 2.20 User Manual

Prestige 100 and 100IH ISDN Router and Router/Hub
The following table describes the diagnostic tests available in Menu 24.4 for your Prestige and the
connections.
Field
Hang Up B1 Call
Hang Up B2 Call
Reset ISDN
ISDN Connection
Test
Manual Call
Internet Setup
Test
Ping Host
Reboot System
Command Mode
The following figure shows an example of a successful connection after selecting option Manual
Call in Menu 24.4.
10-12

Table 10-4 System Maintenance Menu Diagnostic

Description
This command hangs up the B1 channel. This is only applicable if the B1
channel is currently in use.
This tool hangs up the B2 channel. This is only applicable if the B2 channel is
currently in use.
This command re-initializes the ISDN link to the telephone company.
You can test to see if your ISDN line is working properly by using this option.
This command triggers the Prestige to perform a loop-back test to check the
functionality of the ISDN line. If the test is not successful, note the error
message that you receive and consult your network administrator.
This provides a way for you to place a call to a remote node manually. This
tests the connectivity to that remote node. When you use this command, the
screen displays what is happening during the call setup and protocol
negotiation. Below is an example of a successful connection.
This test checks to see if your Internet access configuration has been done
correctly. When this option is chosen, the Prestige places a manual call to the
ISP remote node. If everything is working properly, you will receive an
appropriate response. Otherwise, note the error message and consult your
network administrator.
This diagnostic test pings the host, which determines the functionality of the
TCP/IP protocol on both systems and the links in between.
This option reboots the Prestige.
This option allows you to enter the command mode. This mode allows you to
diagnose and test your Prestige using a specified set of commands.
System Maintenance