Changing The System Password; Figure 2-8 Menu 23.1 - System Password - ZyXEL Communications PRESTIGE 100 - VERSION 2.20 User Manual

Prestige 100 and 100IH ISDN Router and Router/Hub
23 System Security
24 System Maintenance
99 Exit
2.6

Changing the System Password

The first thing your should do before anything else is to change the default system password by
following the steps below.
Enter 23 in the Main Menu to open Menu 23 - System Password as shown below.
Step 1.
When the Submenu 23 System Password appears, type in your existing system password, i.e.,
1234, and press [Enter].
Enter your new system password (up to 30 characters), and press [Enter].
Step 2.
Re-type your new system password for confirmation and press [Enter].
Step 3.
Note that as you type a password, the screen displays a (*) for each character you type.
2-10
Use this menu to setup security related parameters.
This menu provides system status, diagnostics, software upload, etc.
To exit from SMT and return to the blank screen.
Menu 23.1 – System Password
Old Password= ****
New Password= ****
Retype to confirm= ****
Enter here to CONFIRM or ESC to CANCEL:

Figure 2-8 Menu 23.1 - System Password

Hardware Installation and Setup