Prestige 100 and 100IH ISDN Router and Router/Hub
2.5
Navigating the SMT Interface
The SMT (System Management Terminal) is the interface that you use to configure your Prestige.
Several operations that you should be familiar with before you attempt to modify the
configuration are listed in the table below.
Operation
Move forward to
another menu
Move backward to
a previous menu
Move the cursor
Enter information
Required fields
N/A fields
Save your
configuration
Exit the SMT
2-8
Table 2-3 Main Menu Commands
Press/<read> Description
[Enter]
To move forward to a sub-menu, type in the number of the desired
sub-menu and press [Enter].
[Esc]
Press the [Esc] key to move back to the previous menu.
[Enter] or
Within a menu, press [Enter] to move to the next field. You can also
use the [Up]/[Down] arrow keys to move to the previous and the next
[Up]/[Down]
field, respectively.
arrow keys
Fill in, or
You need to fill in two types of fields. The first requires you to type in
the appropriate information. The second allows you to cycle through
Press the
the available choices by pressing the [Space] bar.
[Space bar] to
toggle
All fields with the symbol <?> must be filled in order be able to save
?
<
>
the new configuration.
<N/A>
Some of the fields in the SMT will show a <N/A>. This symbol refers
to an option that is Not Applicable.
[Enter]
Save your configuration by pressing [Enter] at the message [Press
ENTER to confirm or ESC to cancel]. Saving the data on the screen
will take you, in most cases to the previous menu.
Type 99, then
Type 99 at the Main Menu prompt and press [Enter] to exit the SMT
interface.
press [Enter].
Hardware Installation and Setup