Backup Configuration; Figure 10-9 Backup Configuration; Table 10-4 System Maintenance Menu Diagnostic - ZyXEL Communications Prestige 642 User Manual

Prestige 642 ADSL Internet Access Router
The following table describes the diagnostic tests available in Menu 24.4 for your Prestige and the
connections.

Table 10-4 System Maintenance Menu Diagnostic

Field Description
Reset ADSL This command re-initializes the ADSL link to the telephone company.
Ping Host This diagnostic test pings the host, which determines the functionality of the
TCP/IP protocol on both systems and the links in between.
Reboot System This option reboots the Prestige.
Command Mode
This option allows you to enter the command mode. This mode allows you to
diagnose and test your Prestige using a specified set of commands.

10.4 Backup Configuration

Option 5 in Menu 24 - System Maintenance allows you to backup the current Prestige configuration to
your workstation. Backup is highly recommended once your Prestige is functioning properly.
You must perform the backup and restore through the console port. Any serial communications program
should work fine; however, you must use XMODEM protocol to perform the download/upload.
Step 1.
Go to Menu 24.5 (shown next).
Ready to backup Configuration via Xmodem.
Do you want to continue (y/n):
Step 2. Press "Y" to indicate that you want to continue. The following procedure is for the
HyperTerminal program. The procedure for other serial communications programs should be
similar.
10-10

Figure 10-9 Backup Configuration

System Maintenance