The Wmm Screen - ZyXEL Communications P-660HN-51 User Manual

The following table describes the labels in this screen.
Table 16 Network Settings > Wireless > WPS
LABEL
Enable WPS
Method 1
Connect
Method 2
Register
Method 3
Release
Configuration
Generate New
PIN Number
Apply
Cancel

6.6 The WMM Screen

Use this screen to enable Wi-Fi MultiMedia (WMM) and WMM Power Save in wireless networks for
multimedia applications.
Click Network Settings > Wireless > WMM. The following screen displays.
Chapter 6 Wireless
DESCRIPTION
Select Enable to activate WPS on the Zyxel Device.
Use this section to set up a WPS wireless network using Push Button Configuration
(PBC).
Click this button to add another WPS-enabled wireless device (within wireless range
of the Zyxel Device) to your wireless network. This button may either be a physical
button on the outside of device, or a menu button similar to the Connect button on
this screen.
Note: You must press the other wireless device's WPS button within two
minutes of pressing this button.
Use this section to set up a WPS wireless network by entering the PIN of the client into
the Zyxel Device.
Enter the PIN of the device that you are setting up a WPS connection with and click
Register to authenticate and add the wireless device to your wireless network.
You can find the PIN either on the outside of the device, or by checking the
device's settings.
Note: You must also activate WPS on that device within two minutes to
have it present its PIN to the Zyxel Device.
Use this section to set up a WPS wireless network by entering the PIN of the Zyxel
Device into the client.
The default WPS status is configured.
Click this button to remove all configured wireless and wireless security settings for
WPS connections on the Zyxel Device.
The PIN (Personal Identification Number) of the Zyxel Device is shown here. Enter this
PIN in the configuration utility of the device you want to connect to using WPS.
The PIN is not necessary when you use WPS push-button method.
Click the Generate New PIN Number button to have the Zyxel Device create a new
PIN.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
P-660HN-51 User's Guide
72