Figure 3-44 Ip Filter - SMC Networks SMC8748ML3 Management Manual

C
ONFIGURING THE
Web – Click Security, IP Filter. Enter the IP addresses or range of
addresses that are allowed management access to an interface, and click
Add IP Filtering Entry.
CLI – This example restricts management access for Telnet clients.
Console(config)#management telnet-client 192.168.1.19
Console(config)#management telnet-client 192.168.1.25 192.168.1.30
Console(config)#exit
Console#show management all-client
Management IP Filter
HTTP-Client:
Start IP address
-----------------------------------------------
SNMP-Client:
Start IP address
-----------------------------------------------
TELNET-Client:
Start IP address
-----------------------------------------------
1. 192.168.1.19
2. 192.168.1.25
Console#
3-102
S
WITCH

Figure 3-44 IP Filter

End IP address
End IP address
End IP address
192.168.1.19
192.168.1.30
4-38
4-39