Figure 3-50 Acl Mask Configuration - Ip - SMC Networks SMC8748ML3 Management Manual

Gigabit ethernet switch

Hide thumbs Also See for SMC8748ML3:

Table of Contents

ONFIGURING THE

Web – Configure the mask to match the required rules in the IP ingress or

egress ACLs. Set the mask to check for any source or destination address, a

specific host address, or an address range. Include other criteria to search

for in the rules, such as a protocol type or one of the service types. Or use

a bitmask to search for specific protocol port(s) or TCP control code(s).

Then click Add.

Figure 3-50 ACL Mask Configuration - IP