Configuring 802.1X Global Settings; Figure 3-41 802.1X Global Configuration - SMC Networks SMC8748ML3 Management Manual

CLI – This example shows the default global setting for 802.1X.
Console#show dot1x
Global 802.1X Parameters
system-auth-control: enable
802.1X Port Summary
Port Name Status
1/1 disabled
1/2 disabled
. .
.
802.1X Port Details
802.1X is disabled on port 1/1
. .
.
802.1X is disabled on port 26
Console#

Configuring 802.1X Global Settings

The 802.1X protocol provides port authentication. The 802.1X protocol
must be enabled globally for the switch system before port settings are
active.
Command Attributes
802.1X System Authentication Control – Sets the global setting for
802.1X. (Default: Disabled)
Web – Select Security, 802.1X, Configuration. Enable 802.1X globally for
the switch, and click Apply.

Figure 3-41 802.1X Global Configuration

CLI – This example enables 802.1X globally for the switch.
Console(config)#dot1x system-auth-control
Console(config)#
Operation Mode
Single-Host
Single-Host
U A
SER UTHENTICATION
Mode
ForceAuthorized
ForceAuthorized
4-110
Authorized
n/a
n/a
4-105
3-95