Table of Contents
Advertisement
C
ONFIGURING THE
•
Start IP Address – A single IP address, or the starting address of a
range.
•
End IP Address – The end address of a range.
Web – Click Security, IP Filter. Enter the IP addresses or range of
addresses that are allowed management access to an interface, and click
Add IP Filtering Entry.
CLI – This example restricts management access for Telnet clients.
Console(config)#management telnet-client 192.168.1.19
Console(config)#management telnet-client 192.168.1.25 192.168.1.30
Console(config)#exit
Console#show management all-client
Management IP Filter
HTTP-Client:
Start IP address
-----------------------------------------------
SNMP-Client:
Start IP address
-----------------------------------------------
TELNET-Client:
Start IP address
-----------------------------------------------
1. 192.168.1.19
2. 192.168.1.25
Console#
3-104
S
WITCH
Figure 3-42 IP Filter
End IP address
End IP address
End IP address
192.168.1.19
192.168.1.30
4-39
4-40
Advertisement
Table of Contents
