Displaying Vrrp Global Statistics - SMC Networks SMC8748ML3 Management Manual

C
ONFIGURING THE
CLI – This example creates VRRP group 1, sets this switch as the master
virtual router by assigning the primary interface address for the selected
VLAN to the virtual IP address. It then adds a secondary IP address to the
VRRP group, sets all of the other VRRP parameters, and then displays the
configured settings.
Console(config)#interface vlan 1
Console(config-if)#vrrp 1 ip 192.168.1.6
Console(config-if)#vrrp 1 ip 192.168.2.6 secondary
Console(config-if)#vrrp 1 timers advertise 5
Console(config-if)#vrrp 1 preempt delay 10
Console(config-if)#vrrp 1 priority 1
Console(config-if)#vrrp 1 authentication bluebird
Console(config-if)#end
Console#show vrrp
Vlan 1 - Group 1,
state
Virtual IP address
Virtual MAC address
Advertisement interval
Preemption
Min delay
Priority
Authentication
Authentication key
Master Router
Master priority
Master Advertisement interval
Master down interval
Console#

Displaying VRRP Global Statistics

The VRRP Global Statistics page displays counters for errors found in
VRRP protocol packets.
Field Attributes
• VRRP Packets with Invalid Checksum – The total number of VRRP
packets received with an invalid VRRP checksum value.
• VRRP Packets with Unknown Error – The total number of VRRP
packets received with an unknown or unsupported version number.
• VRRP Packets with Invalid VRID – The total number of VRRP
packets received with an invalid VRID for this virtual router.
3-262
S
WITCH
Master
192.168.1.6
00-00-5E-00-01-01
5 sec
enabled
10 sec
1
SimpleText
bluebird
192.168.1.6
255
5 sec
15
4-249
4-382
4-385
4-386
4-384
4-383
4-387