Displaying Information On Neighbor Routers - SMC Networks SMC8748ML3 Management Manual

C
ONFIGURING THE

Displaying Information on Neighbor Routers

You can display about neighboring routers on each interface within an
OSPF area.
Field Attributes
• ID – Neighbor's router ID.
• Priority – Neighbor's router priority.
• State – OSPF state and identification flag.
States include:
- Down – Connection down
- Attempt – Connection down, but attempting contact (non-broadcast
networks)
- Init – Have received Hello packet, but communications not yet
established
- Two-way – Bidirectional communications established
- ExStart – Initializing adjacency between neighbors
- Exchange – Database descriptions being exchanged
- Loading – LSA databases being exchanged
- Full – Neighboring routers now fully adjacent
Identification flags include:
- D – Dynamic neighbor
- S – Static neighbor
- DR – Designated router
- BDR – Backup designated router
• Address – IP address of this interface.
3-334
S
WITCH