Picture - Runco Signature Cinema SC-1 Owner's Operating Manual

Operation

Picture

Picture
Brightness
Contrast
Color
Tint
Sharpness
Table 4-1. Aspect Ratio Settings (continued)
Remote
Aspect Ratio Control
Virtual Cinema
➤
Use the controls in the Picture Menu to calibrate your SC-1 for optimum picture quality.
The SC-1 has been designed to incorporate setup and calibration standards established
by the Imaging Science Foundation (ISF). The ISF has developed carefully crafted,
industry-recognized standards for optimal video performance and has implemented a
training program for technicians and installers to use these standards to obtain optimal
picture quality from Runco video display devices. Accordingly, Runco recommends that
setup and calibration be performed by an ISF certified installation technician.
All signal types require separate processing. Therefore, you need to calibrate each DHD
Controller input separately.
Note
Key
SVC
16:9 Image on
16:9 Image on
2.35:1 Screen
2.35:1 Screen
16:9 Image on
2.35:1 Screen with
Virtual Cinema
When you change a picture quality setting, save the change to a
preset afterwards. Otherwise, the change will be lost when a
different input is selected. (Picture quality settings are saved for
each input separately.) For information about saving settings, refer
to ISF Presets on page 79.
74
Description
A 16:9 image is scaled
NON-linearly (more on the
sides than in the center) to fit
a 2.35:1 screen.
Virtual Cinema is available
only on CineWide-equipped
SC-1 projectors.
Runco SC-1 Owner's Operating Manual