Runco Signature Cinema SC-1 Owner's Operating Manual page 118

Serial Communications
Table 6-1. Serial Commands (continued)
Parameter
Command
The following serial commands are meant to emulate buttons on the remote control or DHD Con-
troller front panel. Each button has its own serial command, so effectively it is as if you were using
the IR remote only you'll be doing so via serial commands. These commands provide active OSD
responses just like the IR remote.
DOWN NA
ENTER NA
LEFT NA
MENU NA
RIGHT NA
UP NA
Value
(min/max) Stored?
NA
NA
NA
NA
NA
NA
106
Description
Down-Arrow ( ) key
ENTER key
Left-Arrow ( ) key
MENU
Right-Arrow ( ) key
Up-Arrow ( ) key
Runco SC-1 Owner's Operating Manual