Getting Started
Loading Paper in the Bypass Tray
Important
❒ Set the size and direction of the loaded paper using the control panel or the
printer driver. Make sure the settings do not conflict. Otherwise, the paper
may jam or the print quality may be affected.
2
❒ Load paper with the print side down and in the short-edge feed direction.
❒ Duplex printing is not possible.
❒ You cannot use the bypass tray to feed in paper that requires a specified print-
ing position (such as preprinted paper). Use Tray 1 for such paper.
❒ If paper is curled, straighten it before loading, by bending it the paper in the
opposite direction to the curl, for example.
❒ Do not load paper while the machine is printing.
❒ Tray 1 and 2 are unavailable while paper is being loaded in the Bypass Tray.
A
Insert the top edge of the paper into the machine.
B
Adjust the paper guides to the paper size.
80
BAA047S
BAA048S