Configuring the Machine Using the Control Panel
PDL Settings
This section describes the PDL settings.
Important
❒ PDL settings are only available for the Type 3 model.
Changing PDL Settings
The procedure for changing the setting for duplex printing is described as an example.
A
Press any menu key.
7
B
Press the {U}{T} keys to select [PDL Settings], and then press the {OK} key.
Menu
PDL Settings
C
Press the {U}{T} keys to select [System], and then press the {OK} key.
PDL Settings
System
D
Press the {U}{T} keys to select [Duplex], and then press the {OK} key.
System
Duplex
E
Press the {U}{T} keys to select [Off], [Long Edge Bind], or [Short Edge Bind],
and then press the {OK} key.
Duplex
The new setting is displayed with an "*" symbol, indicating that the setting
has been changed.
196
BAA004S
Off *