Assigning The Machine's Ip Address Manually - Ricoh Aficio SPC222SF User Manual

Getting Started
H
Press the {Clear/Stop} key to return to the initial screen.
I
If you are requested to reboot the machine, turn off the machine, and then
turn it back on.
J
Print the configuration page to confirm the setting.
The IP address setting will appear under "TCP/IP" on the configuration
page.
2
Note
❒ You can press the { } key to exit to the previous level of the menu tree.
❒ A password for accessing the [Network Settings] menu can be specified in
[Admin Menu Lock].
❒ If your network environment requires a specific transmission speed that is
not automatically detected, set the transmission speed in [LINK Setting] un-
der [Network Settings].
❒ When [DHCP Activated] is enabled, manually configured IP address settings
are not used.
Reference
For details about turning the machine on and off, see p.34 "Turning the
Power on".
For details about printing configuration page, see p.188 "Printing the Con-
figuration Page".
For details about [Admin Menu Lock], see p.191 "Administrator Settings".
For details about [LINK Setting], see p.185 "Network Settings".

Assigning the machine's IP address manually

Important
❒ The IP address assigned to the machine must not be used by any other device
on the same network.
A
Press any menu key.
46
BAA004S