Using The Scanner Function; The Screen In Scanner Mode - Ricoh Aficio SPC222SF User Manual

5. Using the Scanner Function

This chapter describes the functions of the scanner.
There are two scanning methods: scanning using the control panel and scanning
from the computer (TWAIN scanning).

The Screen in Scanner Mode

This section provides information about the screen in scanner mode.
Important
❒ With the Type 1 model, functions that require an ADF cannot be used.
By default, the display shows the copier screen when the machine is turned on.
If the copier or fax screen is shown on the display, press the {Scanner} key on the
control panel to switch to the scanner screen.
❖ Screen in standby mode
Ready
Press Address
Note
❒ Scanner mode cannot be specified as the start-up mode.
BAA130S
119