Initial Setup - Ricoh Aficio SPC222SF User Manual

Getting Started

Initial Setup

When you turn on the machine for the first time, a menu for configuring the set-
tings described below will appear on the display. This section describes how to
complete the Initial Setup.
Important
2
❒
not legally connect a fax machine to the telephone system if the fax number
code is not programmed. Also, the fax header code and the date and time of
transmission must be included in the header of all pages faxed to, from, or
within the United States.
❒ Make sure to select the correct code for the country of use. Selecting the
wrong country code may cause failures in fax transmissions.
❖ Display language
The language selected here is used for the display.
❖ User fax number (Type 2 and Type 3 models only)
The number entered here is used as the fax number of the machine. The user
fax number can contain 0 to 9, space, and "+".
❖ User name (Type 2 and Type 3 models only)
The name entered here is used as the name of the fax sender.
❖ Country code
The country code selected here is used for configuring the time and date dis-
play formats, and the settings related to fax transmissions with appropriate
default values for the country of use.
A
Press the {U}{T} keys to select the required language, and then press the
{OK} key.
If you are using the Type 1 model, proceed to step
B
Enter the user fax number (up to 20 characters) using the number keys, and
then press the {OK} key.
To enter two 0's successively, press the {T} key after entering the first 0.
C
Enter the user name (up to 20 characters) using the number keys, and then
press the {OK} key.
D
Press the {U}{T} keys to select the required country code, and then press
the {OK} key.
Note
❒ You can change the settings configured during the Initial Setup later under
[Admin Settings]. In addition, you can set the machine's time and date under
[Admin Settings].
36
: The fax number code is required by international law. You can-
D
.