Sequential Shooting; High Speed Sequential Shooting/Sequential Shooting/Af Sequential Shooting - Olympus CAMEDIA C-7070 Wide Zoom Advanced Manual

Sequential shooting

There are 4 sequential shooting modes: high speed sequential shooting,
sequential shooting, AF sequential shooting and auto bracketing. To set a
sequential shooting mode, go to [DRIVE] on the mode menu.
Sequential shooting cannot be performed when [K] is set to [TIFF].
o Shoots 1 frame at a time when the shutter button is pressed. (Normal,
single-frame shooting mode)
i
Pictures can be taken at a faster speed than normal sequential shooting.
The sequential shooting speed varies depending on the record mode
setting.
2 frames at approx. 2.5 frames/sec.
j
Focus, exposure and white balance are locked at the first frame.
Approx. 11 frames at 1.1 frames/sec. (in HQ mode)
k
Adjusts the focus 1 frame at a time. The shooting speed is slower than for
normal sequential shooting.
7
When [7] is set, pressing the shutter button fully takes pictures
sequentially while changing the exposure for each frame. The exposure
differential and number of frames can be selected in the menus. The focus
and white balance are locked at the first frame.
Ex: When [7] is set to [±1.0] [×3]
-1.0
High speed sequential shooting/Sequential
shooting/AF sequential shooting
Mode dial
Top menu [MODE MENU]
[k]
• You can also select [DRIVE] from the shortcut menu.
1
Take the picture.
• Press the shutter button fully and keep it pressed. The camera will take
pictures in sequence until you release the button. You can only take 2
frames at a time with high speed sequential shooting.
• You are recommended to use the viewfinder for sequential shooting. During
sequential shooting, the subject does not appear on the monitor.
0.0
[CAMERA] [DRIVE]
+1.0
[i] / [j] /
g"Menus" (P. 23)
89
5