Video Output Selection - Olympus CAMEDIA C-7070 Wide Zoom Advanced Manual

1
Make sure that the TV and camera are turned off. Connect the
A/V OUT jack on the camera to the video input terminal on
the TV using the AV cable provided with the camera.
Connect to the TV's video input
(yellow) and audio input (white)
terminals.
2
Turn the TV on, and set it to the video input mode.
• For details of switching to video input, refer to your TV's instruction manual.
3
Turn the camera on.
• The last picture taken is displayed on the TV. Use the arrow pad to select
the picture you want to display.
TIPS
• You are recommended to use the optional AC adapter when playing back
pictures on a TV.
• The close-up playback, index display and slideshow functions can also be used
on a TV screen.
Note
• Make sure that the camera's video output signal is the same as the TV's video
signal. g"Video output selection" (P. 113)
• The camera's monitor turns off automatically when the AV cable is connected
to the camera.
• Be sure to use the AV cable provided to connect the camera to the TV.
• The picture may appear off-center on the TV screen.

Video output selection

You can select [NTSC] or [PAL] according to your TV's video signal type. Use this
setting when playing back pictures on a TV in a foreign country. Select the [VIDEO
OUT] signal before connecting the AV cable. If you select the wrong video signal
type, you will not be able to play back the recorded pictures properly on the TV.
AV cable
Playback on a TV
A/V OUT jack (MONO)
113
6