Olympus CAMEDIA C-7070 Wide Zoom Advanced Manual page 84

Histogram
Ex.1: When [F ON] or [ON] is selected in P mode.
Bright picture
P 1/1000 1/1000
The part indicated in green in the histogram shows the luminance distribution
within the histogram target mark.
4
Ex.2: When [DIRECT] is selected in P mode.
Mode dial
1
Press the F button, and press Z.
g "Direct buttons" (P. 16)
2
Select a histogram, and press Z.
TIPS
• Press f to switch between normal and histogram display.
g"Direct buttons" (P. 16)
Note
• The histogram is not displayed in the following situations even if [F ON], [ON]
or [DIRECT] is selected.
During panorama shooting or multi-metering.
• The histogram displayed during shooting may differ from the histogram
displayed during playback.
84
F2.8 F2.8 0.0 0.0
Histogram target mark
SET OK
If the peak fills too much of
the red frame, the image
will appear mostly white.
Red dots: Mainly white area
Blue dots: Mainly black area
When there are black and white parts in the
same area, they are displayed as blue dots.
Dark picture
P 1/1000 1/1000
If the peak fills too much of
the blue frame, the image
will appear mostly black.
F2.8 F2.8 0.0 0.0
SET OK