Olympus CAMEDIA C-7070 Wide Zoom Quick Start Manual

d4227qsg_e_7.fm Page 1 Wednesday, October 27, 2004 10:04 AM
1AG6P1P2378--
It is strongly recommended that you follow
these step-by-step instructions to set up and
quickly begin using your new Digital
Camera.
CHARGE AND INSERT THE BATTERY
S
T
E
BCM-2 lithium ion
P
battery charger
a.
Remove the protection cap
from the battery and insert
the battery into the charger.
The indicator light turns green
when the battery is fully
charged (approx. 5 hours).
b.
Make sure the camera is off.
c.
Slide the battery compartment lock on the bottom of the camera and
open the battery compartment cover. Insert the battery until the battery lock
knob clicks into place.
d.
Close the cover and lock.
1 Slide =→)
2 Lift
Battery lock knob

TURN ON THE CAMERA

S
T
E
P
a.
Remove the lens cap.
b.
Pull out the monitor and rotate it.
c. Set the mode dial to P and
turn the power switch to ON.
The lens extends and the
monitor turns on.
Mode dial
Note: After use, turn the
power switch to OFF. The lens
retracts and the monitor turns
off. Return the monitor to its original position.

REVIEWING A PICTURE

S
T
E
P
a.
Press the QUICK VIEW
button. The last picture
taken is displayed.
b.
Use the arrow pad or
control dial to display the
picture you want.
c.
Press the QUICK VIEW
button again when you are
ready to take another
picture.
Arrow pad
VERIFY CAMERA CONNECTION
S
T
E
P
WINDOWS:
a.
From the desktop ("Start"
menu for XP), open "My
Computer".
b.
Verify that the "Removable
Disk" icon representing the
camera is displayed.
MACINTOSH:
a.
Verify that the "NO_NAME"
icon representing the camera is displayed.
• The above steps confirm that the camera has been installed
correctly. You can transfer your images immediately using the
standard drag and drop procedure, or enhance your experience using
OLYMPUS Master software (included).
VM051001

UNPACK THE BOX CONTENTS

S
Please gather the items shown in the illustration. You'll need these
T
to complete the procedures that follow.
E
P
Digital camera
CD-ROM (OLYMPUS
Master software)
The following items are also included in the Digital Camera package: Basic
Manual, warranty card, Advanced Manual on CD-ROM and registration card.
S
T
E
BLM-1 lithium
P
ion battery
Power
a.
Open the card cover.
cable
b.
Insert the xD-Picture Card into the slot as shown.
AC wall
outlet
c.
Close the cover.
1 Close
2 Slide )→=
S
T
E
P
a. With the camera on, press Z.
b.
Use the arrow pad to select [MODE MENU] on the
monitor.
c. Select the [SETUP] tab, and press d. Select [X],
and press d.
Select the date format and press d.
d.
Align ( to ON.
Use a c to set each item and press d to move
e.
Power
to the next item.
switch
f. Press Z when you have finished entering the date
and time.
S
T
E
P
QUICK VIEW button
a.
Display the picture you want to erase
and press the S button.
Control dial
b. Select [YES] and press Z.
S
T
E
P
Now that you've mastered the basic functionality of your new
Olympus Digital Camera, you are ready to begin exploring the
possibilities that digital photography brings to your computer.
Activities such as photo editing, printing and much more are only steps
away!
CD-ROM1
OLYMPUS Master software: Download pictures from the camera,
view, organize, retouch, e-mail and print your digital photos and
movies and more! This CD also contains the complete software users
manual in Adobe Acrobat (PDF) format.
CD-ROM2
Advanced Manual: A complete camera guide in Adobe Acrobat
(PDF) format. This manual contains detailed instructions on the
camera's features and functions which are not covered in the printed
Basic Manual or Quick Start/Quick Reference Guides.
Strap BLM-1 Lithium xD-Picture Card Lens cap and
ion battery String
BCM-2 Lithium ion AV cable USB cable
battery charger
INSERT THE xD-PICTURE CARD
Notch
Contacts
Card cover

SET THE DATE AND TIME

DRIVE
MODE MENU
WB
ALL RESET ON
1/3EV
EV STEP
ENGLISH
'04.01.01
00:00
MY MODE SETUP
2004 . 01
Y M
00 : 00
SELECT SET
ERASING A PICTURE
S button
ERASE
YES
NO
SELECT SELECT SELECT GO GO GO
ABOUT THE CD-ROM DISCS
REVIEW THE DOCUMENTATION
S
T
E
P
Quick Start Guide (this document)
Getting started with your digital camera.
Quick Reference Guide (reverse side of this document)
Quick guide to using common features and functions.
Basic Manual (printed booklet)
Guide to mastering the basics of taking and viewing pictures.
Advanced Manual (CD-ROM)
Detailed instructions on all camera features and functions.
Software Installation Guide (separate document on OLYMPUS Master
CD-ROM)
Detailed instructions on installing the OLYMPUS Master software.
ATTACH THE LENS CAP AND STRAP
S
T
E
P
Attach the lens cap string and camera strap as shown. Attaching the strap to
the camera makes it easier to handle.
Strap eyelet

TAKING A PICTURE

S
T
E
P
a.
Place the AF target mark on your subject using
the monitor or viewfinder.
b.
Press the shutter button halfway to lock the
focus and exposure, then press the shutter button
completely to take the picture.
Shutter button
Viewfinder
Monitor
.
01
D
GO OK

CONNECTING THE CAMERA

S

TO A COMPUTER

T
E
P
a. With the camera on, press Z.
b.
Select [MODE MENU]. Select the [SETUP] tab, and
press d.
c.
Scroll down several pages. Select [USB], and
press d. Select [PC], and press Z.
d.
Turn the camera off.
e.
Connect the camera to the computer using the USB cable (included).
f. Set the mode dial to q and turn the power switch to ON.
OK OK OK
INSTALLING THE CAMERA
S
SOFTWARE
T
E
P
a.
Insert the OLYMPUS Master
CD-ROM into your computer's
CD-ROM drive.
b.
For Windows:
Click the "OLYMPUS Master"
button in the "Setup" window.
For Macintosh:
Double-click the "Installer"
icon.
c.
Follow the on-screen instructions. For more details, click "Please Read First".
Please refer to the Quick Reference Guide on the reverse side of
this sheet to familiarize yourself with the commonly used features
and functions of your new Olympus Digital Camera.
Ring
Stopper
P 1/1000 1/1000 F2.8 F2.8 0.0 0.0
30 30 30
HQ HQ 3072 2304 3072 2304
AF target mark
USB PC
SHORT CUT PRINT
CUSTOM BUTTON
DIAL
Printed in Japan