Exposure Compensation - Olympus CAMEDIA C-7070 Wide Zoom Advanced Manual

Note
• [AUTO] is not available in A, S, or M modes.
• ISO ratings are based on the sensitivity of normal camera film.
• The shutter speed is decreased when [ISO] is set to [AUTO] and you are
shooting in dark conditions without a flash. In this case, the sensitivity is
automatically increased to avoid the risk of camera movement.
• When [ISO] is set to [AUTO], the sensitivity automatically increases if the
subject is too far away for the flash to reach.
• When using slow synchronization in P, A or S modes, the slowest available
shutter speed varies depending on the ISO setting.

Exposure compensation

This function allows you to make fine changes to the exposure setting. The
setting range is ±2.0 EV. When the setting is changed, you can check the
result on the monitor.
Mode dial
1
Press the F button, and turn the control dial.
Set the exposure compensation, and press the F button.
g "Direct buttons" (P. 16)
• Exposure compensation can be set in 1/3EV or 1/2EV steps. g"Exposure
steps" (P. 122)
Exposure compensation
4
73