Olympus CAMEDIA C-7070 Wide Zoom Advanced Manual page 180

Troubleshooting
Possible cause
The picture is too dark.
The flash was blocked
by your finger.
The subject was out of
the working range of the
flash.
The flash is set to [$].
The subject was too
small and was backlit.
The sequential shooting
mode was used.
The center of the subject
is too bright.
The aperture value is too
high in A (M) mode.
The shutter speed is too
fast in S (M) mode.
The colors of pictures look unnatural.
Indoor lighting affected
the picture's colors.
No white in the picture.
The white balance
setting is wrong.
A filter was used.
Part of the picture is dark.
The lens was partly
blocked by your finger or
10
the strap.
180
Corrective action
Hold the camera correctly, keeping your
fingers away from the flash.
Shoot within the flash working range.
Select a flash mode other than [$].
Set the flash to [ # ], or use spot metering
mode.
Higher shutter speeds are used during
sequential shooting, which may result in
pictures that are darker than usual. Set
[DRIVE] to [o] in [MODE MENU].
If the center of the subject is too bright, the
image as a whole emerges darker. Adjust the
exposure compensation toward plus (+).
Decrease the aperture value or set the
camera to P mode.
Reduce the shutter speed or set the camera
to P mode.
Set the white balance according to the
lighting.
Include something white in the picture, or
shoot using [ # ].
Adjust the white balance according to the
light source.
The image may be discolored according to
the filter used. Use the one-touch white
balance function.
Hold the camera correctly, keeping your
fingers and the strap away from the lens.
Ref.
page
P. 28
P. 47
P. 47
P. 47,
69
P. 89
P. 73
P. 57
P. 59
P. 74
P. 47
P. 74
P. 76
P. 28