Resetting Print Reservation Data - Olympus CAMEDIA C-7070 Wide Zoom Advanced Manual

Print settings (DPOF)
5
Press Z to complete the print reservations and return to the
picture selection screen, then press Z again.
6
Press b to select [END].
• The [< PRINT ORDER] screen is
displayed. Follow the operation guide to
return to the playback screen.
Note
• The size of the printed picture varies depending on the printer settings. If the
trimmed picture is small, printing magnification increases the picture
accordingly, resulting in a printed picture with lower resolution.
• For the best results with enlarged prints, you are recommended to use the
[TIFF], [SHQ] or [HQ] mode.
• The original picture is not trimmed. If your printer does not have the trimming
function, the picture will be printed untrimmed.
• Do not rotate pictures that have been trimmed. Doing so could change the
cropped area.

Resetting print reservation data

This function allows you to reset the print reservation data for pictures stored on the
card.
You can reset all the print reservation data or just for selected pictures.
(To reset the print reservation data for all the pictures
8
Mode dial
1
Press the < button.
g"Direct buttons" (P. 16)
2
Select [RESET], and press Z.
• If there is no print reservation data
stored on the card, the [< PRINT
ORDER] screen is not displayed.
• Press b to return to the playback
screen.
156
SINGLE PRINT
END MORE
CANCEL
PRINT ORDER
PRINT ORDERED
RESET
KEEP
CANCEL SELECT GO
OK