Troubleshooting - Olympus CAMEDIA C-7070 Wide Zoom Advanced Manual

Olympus camedia c-7070 wide zoom: reference guide
Hide thumbs Also See for CAMEDIA C-7070 Wide Zoom:
Table of Contents

Advertisement

Troubleshooting

Troubleshooting
(Preparatory operations
Possible cause
The camera does not turn on or function buttons do not respond.
The power is off.
The battery is exhausted. Charge the battery.
The battery is temporarily
unable to function
because of the cold.
The camera is in the
sleep mode.
The camera is connected
to a computer.
(Shooting
Possible cause
No picture is taken when the shutter button is pressed.
The battery is exhausted. Charge the battery.
The camera is in the
playback mode.
The flash has not
finished charging.
The card is full.
The battery ran out of power
during shooting or while the
images were being written
to the card. (Monitor turns
10
off or the battery check
indicator blinks.)
The memory gauge is
full.
There is a problem with
the card.
176
Corrective action
Turn the power switch to ON, and turn on the
camera.
Warm the battery by putting it in your pocket
for a while.
Operate the camera (press the shutter button
or zoom lever).
The camera will not operate while it is
connected to a computer.
Corrective action
Set the mode dial to a mode other than q.
Remove your finger from the shutter button,
and wait until the orange lamp and # (flash
charge) indication stop blinking before taking
the picture.
Erase unwanted pictures or insert a new
card. Before erasing, download important
images to a computer.
Charge the battery. (Wait until the card
access lamp turns off when blinking.)
Wait until there is space in the memory
gauge.
See "Error codes".
Ref.
page
Ref.
page
P. 13
P. 47
P. 116
P. 174

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents