Auto Bracketing - Olympus CAMEDIA C-7070 Wide Zoom Advanced Manual

Sequential shooting

Auto bracketing

Mode dial
Top menu [MODE MENU]
• You can also select [DRIVE] from the shortcut menu.
1
Select the exposure differential
and number of shots and press
Z.
• The differential that can be selected
varies depending on the [EV STEP]
setting. g"Exposure steps" (P. 122)
• In some combinations of image size and
record mode, only [×3] is available.
2
5
Take the picture.
• Press the shutter button fully and keep it pressed to shoot the preset
number of pictures. You can stop shooting at any time by releasing the
shutter button.
Note
• Sequential shooting ([i], [j], [k], [7]) is not possible in the
following situations.
When [R] is selected for the f mode, [K] is set to [TIFF] or when
[NOISE REDUCTION] is set to [ON].
• [j] and [k] are not available when [K] is set to [RAW].
• In sequential shooting mode ([i], [j], [k], [7]), the built-in flash
does not fire. The external flash does not fire in 7 mode.
• In modes other than S and M, as the maximum shutter speed is set to 1/30
sec., adequate exposure is not obtained when shooting a dark subject.
• When auto bracketing in a mode other than S mode, the camera auto brackets
at a shutter speed of 1/30 sec. if the shutter speed is set longer than 1/30 sec.
with an exposure differential of 0.
• If the battery power is low and the battery check blinks during sequential
shooting, shooting stops and the camera starts saving the pictures you have
taken. Whether or not all of the shots are saved depends on how much battery
power remains.
• If there is not enough space available on the card for the number of frames you
have set during auto bracketing, you cannot continue shooting.
90
[CAMERA] [DRIVE] [7]
g"Menus" (P. 23)
BKT
± 0.3 3
± 0.7 5
± 1.0
SELECT GO
OK