Troubleshooting Guide - Olympus DP80 Instructions Manual

8

TROUBLESHOOTING GUIDE

Under certain conditions, the performance of the camera may be adversely affected by factors other than defects. If
problems occur, please review the following list and take remedial action as needed. If you cannot solve the problem
after checking the entire list, please contact Olympus for assistance.
Problem
The software will not start up.
Live image is not displayed.
36
Cause
The camera and PC are connected
improperly.
The PCIe interface board is in-
stalled improperly.
The software is installed improperly.
The camera and PC are connected
improperly.
The microscope illumination is off.
The microscope is not set to the
camera light path. The illumination
or specimen focusing is adjusted
improperly.
The ISO speed or exposure time is
set improperly.
Remedy
Connect the camera head and PC
properly.
Install the PCIe interface board
properly.
Install the software.
Connect the camera head and PC
properly.
Turn on the microscope illumina-
tion, adjust the lighting and focus-
ing correctly, and select the camera
light path.
Set the ISO speed, exposure mode,
exposure time and level properly.
Page
24
22
26
24
–
(Online
manual)