Video Output Selection - Olympus CAMEDIA C-730 Ultra Zoom Reference Manual

Video output selection

You can select NTSC or PAL according to your TV's video signal type. Select
the video signal type of the region before shooting. If you use the wrong video
signal type, you will not be able to play back the recorded images properly on
your TV.
Mode dial
setting
In the top menu, select MODE MENU T
SETUP T "VIDEO OUT" T NTSC or PAL.
Press . Press
menu.
● The factory default setting varies depending
on the area where you purchased this
camera.
Video signal types by region
NTSC : Japan, Taiwan, Korea, U.S.A
PAL : Europe, China
Be sure to check your region's video signal
type before you use the camera with a TV.
182
again to cancel the
button