Unpacking The Printer - Intermec EasyCoder PX4i User Manual

Chapter 2 — Installation

Unpacking the Printer

6 EasyCoder PX4i Bar Code Label Printer User's Guide (Fingerprint Version)
Before you install the printer, unpack and examine it for possible
damage or missing parts.
To unpack the printer
1 Open the box and lift the printer out.
2 Check that the printer has not been visibly damaged during
transportation. Keep the packing materials in case you need to
move or reship the printer.
3 Check the label on the printer's rear plate, which gives the
voltage, the part number, and the serial number.
4 Check that any options you ordered are included.
5 Check that all the accessories are included:
• Intermec EasyCoder PX4i printer
• Adapter for 3 in media roll core
• Power cord
• Quality check card
• Cleaning card
• Compact disk (CD) with supporting software, additional
manuals, and product information.
6 Check that the type of power cord is appropriate for the local
standard. The printer works within 90 to 265 VAC,
50 to 60 Hz.
7 If the printer has been damaged in any way during
transportation, report the damage to the carrier immediately.
8 If the delivery is incorrect or any parts are missing, report it
immediately to the distributor.