Speaker - HP Compaq dc7800 Reference Manual

Speaker

1. Prepare the computer for disassembly
2. Remove the computer access panel
3. Remove the front bezel
4. Remove the hard drive
5. Remove the hard drive cage
6. Remove the optical drive
7. Disconnect the speaker cable from the system board.
8. Remove the screws (1) that secure the speaker to the chassis, and then slide the speaker up to
remove it from the chassis (2).
To install the speaker, reverse the removal procedure.
182 Chapter 9 Removal and Replacement Procedures Ultra-Slim Desktop (USDT) Chassis
(Preparation for Disassembly on page
(Computer Access Panel on page
(Front Bezel on page 164).
(Hard Drive on page 174).
(Hard Drive Cage on page
(Removing the Optical Drive on page
159).
163).
178).
170).