Bezel Blanks - HP Compaq dc7800 Reference Manual
Business pc
Hide thumbs
Also See for Compaq dc7800:
- Technical reference manual (102 pages) ,
- Troubleshooting manual (70 pages) ,
- Quickspecs (67 pages)
Table of Contents
Advertisement
Bezel Blanks
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the front bezel
4.
Gently pull the subpanel, with the bezel blanks secured in it, away from the front bezel, then remove
the desired bezel blank.
CAUTION:
subpanel away at an angle could damage the pins that align it with the front bezel.
To install a bezel blank, reverse the removal procedure.
NOTE:
When replacing the subpanel, ensure that the aligning pins and any remaining bezel blanks
are in their proper orientation. The logo in the subpanel should be located at the bottom of the subpanel
when properly oriented.
66
Chapter 7 Removal and Replacement Procedures Convertible Minitower (CMT) Chassis
(Computer Access Panel on page
(Front Bezel on page
Hold the subpanel straight when pulling it away from the front bezel. Pulling the
(Preparation for Disassembly on page
64).
65).
60).
Advertisement
Table of Contents
