Chassis Fan - HP Compaq dc7800 Reference Manual
Business pc
Hide thumbs
Also See for Compaq dc7800:
- Technical reference manual (102 pages) ,
- Troubleshooting manual (70 pages) ,
- Quickspecs (67 pages)
Table of Contents
Advertisement
Chassis Fan
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the front bezel
4.
Remove the fan shroud
5.
Disconnect the fan cable from the system board.
6.
Remove the two screws that secure the fan to the chassis (1), slide the fan to the right, tilt the fan
so it clears the top of the chassis (2), and then lift the fan out of the chassis (3).
To install the chassis fan, reverse the removal procedure. Be sure to orient the air flow into the unit.
146 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
(Preparation for Disassembly on page
(Computer Access Panel on page
(Front Bezel on page
114).
(Fan Shroud on page
145).
107).
113).
Advertisement
Table of Contents
