Smart Cover Sensor; Setting The Smart Cover Sensor Protection Level; Smart Cover Lock - HP Compaq dc7800 Reference Manual

For users with less stringent security requirements, HP does not recommend enabling DriveLock. Users
in this category include personal users or users who do not maintain sensitive data on their hard drives
as a common practice. For these users, the potential loss of a hard drive resulting from forgetting both
passwords is much greater than the value of the data DriveLock has been designed to protect. Access
to Computer Setup and DriveLock can be restricted through the Setup password. By specifying a Setup
password and not giving it to end users, system administrators are able to restrict users from enabling
DriveLock.

Smart Cover Sensor

CoverRemoval Sensor, available on some models, is a combination of hardware and software
technology that can alert you when the computer cover or side panel has been removed. There are
three levels of protection, as described in the following table.
Table 4-2 Smart Cover Sensor Protection Levels
Level
Level 0
Level 1
Level 2
NOTE: These settings can be changed using Computer Setup. For more information about Computer Setup,
see the Computer Setup (F10) Utility Guide on the Documentation and Diagnostics CD.

Setting the Smart Cover Sensor Protection Level

To set the Smart Cover Sensor protection level, complete the following steps:
1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart.
2. As soon as the computer is turned on, press
Computer Setup. Press
NOTE:
press F10
3. Select Security > Smart Cover > Cover Removal Sensor, and select the desired security level.
4. Before exiting, click File > Save Changes and Exit.

Smart Cover Lock

The Smart Cover Lock is a software-controllable cover lock featured on some HP computers. This lock
prevents unauthorized access to the internal components. Computers ship with the Smart Cover Lock
in the unlocked position.
CAUTION:
password prevents unauthorized access to the Computer Setup utility.
NOTE: The Smart Cover Lock is available as an option on some systems.
Setting Description
Disabled Smart Cover Sensor is disabled (default).
Notify User When the computer is restarted, the screen displays a message
indicating that the computer cover or side panel has been removed.
Setup Password When the computer is restarted, the screen displays a message
indicating that the computer cover or side panel has been removed. You
must enter the setup password to continue.
Enter to bypass the title screen, if necessary.
If you do not press F10
when the monitor light turns green to access the utility.
For maximum cover lock security, be sure to establish a setup password. The setup
F10 when the monitor light turns green to enter
at the appropriate time, you must restart the computer and again
Asset Tracking and Security 45