Expansion Cards - HP Compaq dc7800 Reference Manual

Business pc
Hide thumbs Also See for Compaq dc7800:
Table of Contents

Advertisement

Expansion Cards

The computer has three standard full-height PCI expansion slots that can accommodate an expansion
card up to 34 cm (13.4 inches) in length. The computer also has two PCI Express x1 expansion slots
and one PCI Express x16 expansion slot.
Item
Description
1
PCI Express x16 expansion slot
2
PCI Express x1 expansion slot
3
PCI Express x1 expansion slot
4
PCI expansion slot
5
PCI expansion slot
6
PCI expansion slot
NOTE:
You can install a PCI Express x1, x4, x8, or x16 expansion card in the PCI Express x16
expansion slot.
To remove, replace, or add an expansion card:
1.
Prepare the computer for disassembly
2.
Remove the computer access panel
3.
Locate the correct vacant expansion socket on the system board and the corresponding expansion
slot on the back of the computer chassis.
72
Chapter 7 Removal and Replacement Procedures Convertible Minitower (CMT) Chassis
(Preparation for Disassembly on page
(Computer Access Panel on page
60).
64).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dc73 - blade workstation client

Table of Contents