Hard Drive Cage
1.
Prepare the computer for disassembly
2.
Remove the computer access panel
3.
Remove the optical drive
4.
Remove the hard drive
5.
Remove the optical disk drive connector
6.
Remove the screw that secures the cage to the chassis (1), lift the tab on the hard drive cage (2),
pull the cage toward the rear of the chassis (3), and then lift the cage out of the chassis (4).
To install the hard drive cage, reverse the removal procedures.
178 Chapter 9 Removal and Replacement Procedures Ultra-Slim Desktop (USDT) Chassis
(Preparation for Disassembly on page
(Computer Access Panel on page
(Removing the Optical Drive on page
(Hard Drive on page
174).
(Optical Drive Connector on page
159).
163).
170).
173).