Computer Access Panel
1.
Prepare the computer for disassembly
CAUTION:
and that the power cord is disconnected from the electrical outlet.
2.
Lift up on the access panel handle (1), slide the access panel back about 1.25 cm (1/2 inch), and
then lift it up and off the unit (2).
To install the access panel, reverse the removal procedure.
64
Chapter 7 Removal and Replacement Procedures Convertible Minitower (CMT) Chassis
Before removing the computer access panel, ensure that the computer is turned off
(Preparation for Disassembly on page
60).