Serial Port - HP Compaq dc7800 Reference Manual
Business pc
Hide thumbs
Also See for Compaq dc7800:
- Technical reference manual (102 pages) ,
- Troubleshooting manual (70 pages) ,
- Quickspecs (67 pages)
Table of Contents
Advertisement
Serial Port
1.
Prepare the computer for disassembly
2.
Remove the computer access panel
3.
Push down the green tabs (1), and then rotate the tab back 90 degrees out of the rear of the chassis
(2).
4.
Disconnect the serial port cable from the system board (3).
5.
Remove the port assembly from the chassis (4).
To install the serial port, reverse the removal procedure.
(Preparation for Disassembly on page
(Computer Access Panel on page
60).
64).
Serial Port
97
Advertisement
Table of Contents
