Heatsink - HP Compaq dc7800 Reference Manual
Business pc
Hide thumbs
Also See for Compaq dc7800:
- Technical reference manual (102 pages) ,
- Troubleshooting manual (70 pages) ,
- Quickspecs (67 pages)
Table of Contents
Advertisement
Heatsink
1.
Prepare the computer for disassembly
2.
Remove the computer access panel
3.
Lift the fan up and place it on top of the optical drive to access the front bezel release tabs. You
do not need to disconnect the fan cable from the system board.
4.
Unscrew the four screws that secure the heatsink to the system board, and then lift the heatsink
from the system board.
CAUTION:
X) to even the downward forces on the processor. This is especially important as the pins on the
socket are very fragile and any damage to them may require replacing the system board.
184 Chapter 9 Removal and Replacement Procedures Ultra-Slim Desktop (USDT) Chassis
Heatsink retaining screws should be removed in diagonally opposite pairs (as in an
(Preparation for Disassembly on page
(Computer Access Panel on page
159).
163).
Advertisement
Table of Contents
