Multi Channel Stereo Playback; Virtual Playback; Stereo Playback; Direct Playback - Denon AVR-1312 Getting Started

GViews on the displayH
q w
q
Shows a decoder to be used.
• A DOLBY DIGITAL decoder is displayed as "DOLBY D".
• A DOLBY DIGITAL Plus decoder is displayed as "DOLBY DIGITAL
+".
w
Shows a decoder that creates sound output from the surround
back speakers.
For an input signal that can be reproduced in each surround mode, see
"Surround modes and surround parameters" (vpage 48).
Standard playback

Multi channel stereo playback

This mode is for enjoying stereo sound from all speakers.
1
Playing the source
– 17).
2
SURROUND
Press
SURROUND
CH STEREO".
Multi channel stereo playback begins.
NOTE
When the input signal is Dolby TrueHD, Dolby Digital Plus, DTS-HD or
DTS Express, you cannot select multi channel stereo mode.

Virtual playback

This mode is for enjoying surround effects using only the front
speakers or headphones.
1
Playing the source
– 17).
2
Press SURROUND
SURROUND
"VIRTUAL".
Virtual playback begins.
NOTE
When the input signal is Dolby TrueHD, Dolby Digital Plus, DTS-HD or
DTS Express, you cannot select virtual mode.
(vpage 12
0 or
1 to select "MULTI
(vpage 12
0 or
1 to select
21

Stereo playback

This is the mode for playing in stereo. The tone can be adjusted.
• Sound is output from the front left and right speakers and subwoofer.
• If multichannel signals are input, they are mixed down to 2-channel
audio and are played.
1
Playing the source (vpage 12
– 17).
2
SURROUND
Press 0 or
SURROUND 1 to select
"STEREO".
Stereo playback begins.

Direct playback

Sound recorded in source is played as is.
• Surround back signals are not created.
• In this mode, the following items cannot be adjusted.
• Tone (vpage 38) • RESTORER (vpage 39)
1
Playing the source (vpage 12
– 17).
2
Press SURROUND 0 or
SURROUND
1 to select
"DIRECT".
Direct playback begins.