Table of Contents
Advertisement
Troubleshooting
Troubleshooting
Problem:
Easy Install Wizard cannot find my Message Manager
Solution:
If the Easy Install Wizard is not able to find the Message Manager
during the installation process your Message Manager may not be
connected properly.
1.
The Easy Install Wizard must be run from the computer that is
connected to the Belkin Message Manager.
2.
Make sure that the Belkin Message Manager is ON; the Power
LED will be green and solid.
3.
Make sure the LAN link light that corresponds to the port you
connected to the computer is ON; check the network cable
going from the computer to the Belkin Message Manager
one of the four computer ports and not in the Internet port.
If the Easy Install Wizard is still unable to find the Message
Manager, reference the section Alternative Setup Method for
installation steps on page 18 of this manual.
76
76
is in
Advertisement
Table of Contents
