Table of Contents
Advertisement
Using the Web-Based Advanced User Interface
Using the Web-Based Advanced User Interface
Changing System Settings
The "System Settings" page is where you can enter a new administrator
password, set the time zone, enable remote management, and turn on and
off the NAT function of the Message Manager.
Setting or Changing the Administrator Password
The Message Manager ships with NO password entered. If you wish to add
a password for greater security, you can set a password here. Write down
your password and keep it in a safe place, as you will need it if you need to
log into the Message Manager in the future. It is also recommended that
you set a password if you plan to use the remote management feature of your
Message Manager.
Changing the Login Timeout Setting
The login timeout option allows you to set the period of time that you can be
logged into the Message Manager's advanced setup interface. The timer
starts when there has been no activity. For example, you have made some
changes in the advanced setup interface, then left your computer alone
without clicking "Logout". Assuming the timeout is set to 10 minutes, then 10
minutes after you leave, the login session will expire. You will have to login to
the Message Manager again to make any more changes. The login timeout
option is for security purposes and the default is set to 10 minutes.
Note:
Only one computer can be logged into the Message Manager's
advanced setup interface at one time.
52
52
Advertisement
Table of Contents
