Table of Contents
Advertisement
Manually Configuring Computer Network Settings
Manually Configuring Computer Network Settings
Set up the computer that is connected to the cable or DSL modem
FIRST using these steps. You can also use these steps to add
computers to your Message Manager after the Message Manager has
been set up to connect to the Internet.
Manually Configuring Network Adapters in Mac OS ® up to 9.x
In order for your computer to properly communicate with your
Message Manager, you will need to change your Mac's TCP/IP
settings to DHCP.
1.
Pull down the Apple menu. Select "Control Panels" and
select "TCP/IP".
2.
You will see the TCP/IP control panel. Select "Ethernet Built-In"
or "Ethernet" in the "Connect via:" drop-down menu (a).
(a)
(b)
3.
Next to "Configure" (b), if "Manually" is selected, your Message
Manager will need to be set up for a static IP connection type.
Write the address information in the table below. You will need to
enter this information into the Message Manager.
4.
If not already set, at "Configure:", choose "Using DHCP
Server". This will tell the computer to obtain an IP address
from the Message Manager.
58
58
Advertisement
Table of Contents
