Belkin F1PG111EN User Manual page 25

Alternate Setup Method
4. Login/Logout Button
This button enables you to log in and out of the Message
Manager with the press of one button. When you are logged into
the Message Manager, this button will change to read "Logout".
Logging into the Message Manager will take you to a separate
login page where you will need to enter a password. When you
are logged in to the Message Manager, you can make changes to
the settings. When you are finished making changes, you can log
out of the Message Manager by clicking the "Logout" button. For
more information about logging into the Message Manager, see
the section called "Logging into the Message Manager".
5. Help Button
The "Help" button gives you access to the Message Manager's
help pages. Help is also available on many pages by clicking
"more info" next to certain sections of each page.
6. LAN Settings
Shows you the settings of the Local Area Network (LAN) side of
the Message Manager. Changes can be made to the settings by
clicking on any one of the links (IP Address, Subnet Mask, DHCP
Server) or by clicking the "LAN" Quick Navigation link on the left
side of the screen.
7. Features
Shows the status of the Message Manager's NAT, firewall,
and wireless features. Changes can be made to the settings
by clicking on any one of the links or by clicking the "Quick
Navigation" links on the left side of the screen.
8. Internet Settings
Shows the settings of the Internet/WAN side of the Message
Manager that connects to the Internet. Changes to any of these
settings can be made by clicking on the links or by clicking on
the "Internet/WAN" Quick Navigation link on the left side of
the screen.
9. Version Info
Shows the firmware version, boot-code version, hardware
version, and serial number of the Message Manager.
10. Page Name
The page you are on can be identified by this name. This manual
will sometimes refer to pages by name. For instance
"LAN>LAN Settings" refers to the "LAN Settings" page.
23 23
1
2
3
4
5
6
7
8
9
10
11
12