Table of Contents
Advertisement
Alternate Setup Method
Setting your Internet Service Provider (ISP) Connection Type
to Static IP
A static IP address connection type is less common than other connection
types. If your ISP uses static IP addressing, you will need your IP address,
subnet mask, and ISP gateway address. This information is available from
your ISP or on the paperwork that your ISP left with you. Type in your
information, then click "Apply Changes" (5). After you apply the changes,
the Internet Status indicator will read "Connected" if your Message
Manager is set up properly.
(1)
(2)
(3)
A static IP address connection type is less common than other
connection types. If your ISP uses static IP addressing, you will need
(1)
your IP address
This information is available from your ISP or on the paperwork that
your ISP left with you. Type in your information, then click "Apply
(4)
Changes"
. After you apply the changes, the Internet Status
indicator will read "connection OK" if your Belkin Message Manager is
set up properly.
1.
IP Address
Provided by your ISP. Enter your IP address here.
2.
Subnet Mask
Provided by your ISP. Enter your subnet mask here.
3.
ISP Gateway Address
Provided by your ISP. Enter the ISP gateway address here.
(2)
, subnet mask
, and ISP gateway address
27
27
(4)
(3)
.
1
2
3
4
5
6
7
8
9
10
11
12
Advertisement
Table of Contents
