Belkin F1PG111EN Quick Start

Make sure you have
1. Install
the following:
Install the Easy Install Wizard Software
Belkin Easy Belkin Message Power Ethernet Telephone
Install Wizard Manager Supply Cable Cord
STOP! IMPORTANT!
Software CD
• If you are currently sharing your cable or DSL broadband access using a
router/gateway you can plug the Belkin Message Manager into one of the
available networking ports on your router/gateway. Refer to the section
Auto Setup
of your manual titled "Connecting your Message Manager to a Router/
Gateway". If you are going to connect the Belkin Message Manager directly
Users of
User Features to a router/gateway you DO NOT need to run this Installation Wizard.
Windows ® 98SE
Manual Guide
Windows Me • If you currently have broadband and do not have a router/gateway, then you
Windows 2000
may continue with Easy Install.
Windows XP
can use Easy Install Wizard
1.1 Shut down any programs that are running on your computer at
Manual Setup
this time.
IMPORTANT: Run the Easy Install 1.2
Turn off any firewall or Internet connection sharing software on
Advanced Users Go to
Wizard from the computer that is
the "Alternate Setup your computer.
directly connected to the cable or
Method" section of
1.3 Insert the Easy Install Wizard software CD into your CD-ROM
DSL modem. DO NOT CONNECT
your User Manual.
the Belkin Message Manager at Drive. The Easy Installation Wizard screen will automatically
this time.
appear on your screen within 15 seconds. If it does not, select
your CD-ROM drive from "My Computer" and double-click on
the file named "Setup" on the CD-ROM.
NOTE for Windows Users:
If the Easy Install Wiizard does not start up
automatically, select your CD-ROM drive from "My
Make sure you have the following 1 Computer" and double-click on the "Setup" on the
CD-ROM.
1.4
You will see the Wizard's
welcome screen.
(click) Next
1.5 Easy Install will show you a
progress screen each time a
step in the setup has been
completed. Each time you
see the progress screen, click
"Next" when you are ready to
move to the next step.
Next
(click)
1.6 The Wizard will now examine
your computer's network
settings and gather information
needed to complete the Belkin
Message Manager's connection
to the Internet. When the
Wizard is finished examining
your computer, click "Next"
to continue.
(click) Next
Install 2 Install 3
2. Connect
Connect the Message Manager to your Modem
and Computer
The Wizard will walk you through connecting your Message Manager to
your computer and modem. Follow the steps on the screen using the
pictures as a guide.
2.1 Locate the cable connected
between your modem and
the networking port on your
computer. Unplug this cable
from the computer and plug
it into the WAN port on the
Belkin Message Manager.
Next
(click)
Connect 4
2.2 2.4
Locate the Ethernet cable that This step instructs you to
is included with your Message locate the power supply that
Manager. Plug one end of this is included with your Message
cable into the LAN port on Manager. Plug the power
your Message Manager. Plug supply's small connector
the other end of the cable into the power jack on the
into the networking port on Message Manager. Plug the
your computer. power supply into an empty
power outlet.
Next
(click)
(click)
2.3
Connect your analog phone to
2.5 Look at the lights on the
Phone Port of your Message
front of your Belkin Message
Manager. Plug the Phone line
Manager. Make sure the
from your wall outlet to the
appropriate lights are ON.
Phone Line Port on the Belkin
Refer to the Easy Install
Message Manager.
software on your computer's
screen for more details.
(click) Next
(click)
Connect 5
Next
Next
Connect 6