Table of Contents
Advertisement
Manually Configuring Computer Network Settings
4.
Select the "TCP/IP" tab (c). Next to "Configure" (d), you should
see "Manually" or "Using DHCP". If you do not, check the PPPoE
tab (e) to make sure that "Connect using PPPoE" is NOT selected.
If it is, you will need to configure your Message Manager for a
PPPoE connection type using your user name and password.
5.
If "Manually" is selected, your Message Manager will need to
be set up for a static IP connection type. Write the address
information in the table below. You will need to enter this
information into the Message Manager.
6.
If not already selected, select "Using DHCP" next to "Configure"
(d), then click "Apply Now".
Your network adapter(s) are now configured for use with the
Message Manager.
61
61
1
2
3
4
5
6
7
8
9
10
11
12
Advertisement
Table of Contents
